Monitoring Management Interfaces Link State
Description
By Default, 61000/41000 Security System monitor link state only on data ports (ethX-YZ). The Management Monitor feature lets SNMP monitor Management ports for the SSM60 and SSM160 components. The link state is sent to all SGMs and is integrated as part of the Chassis High Availability mechanism. Once enabled, management ports show in the asg stat -v output.
Monitored management ports are included in the Chassis grade mechanism, according to pre-defined factors (default = 11). In addition, the asg if command shows the link state of Management interfaces based on the feature mechanism.
|
Note - For the SSM60, it is necessary to pre-configure the Base Switch to enable the SNMP server before you enable the feature itself. See for details. After you configure the SNMP server, run:
set chassis high-availability management-monitoring on
|
|
|
