Corporate DNS Servers

You can use the Corporate DNS Servers page to resolve:

  • A DNS server into an IP address

  • A domain into a DNS server

  • All domains

To resolve a DNS server into an IP address:

  1. From the Settings menu, click Corporate DNS Servers.

  2. In the DNS Servers table, click +, and enter Server Name and IP Address.

  3. Click Save.

    The system adds the entry to the table and the Status column shows Connected to site <site name>, where site name is the name of the data center or the cloudClosed An administrator approved Harmony Connect cloud location that processes the internet and corporate traffic. infrastructure.

  4. Click Apply Changes.

    A blue banner appears at the top with the status message "Corporate DNS Server change in progress". It takes approximately five minutes to apply the changes. After the system applies the changes successfully, the banner disappears.

    If the system fails to apply the changes, a red banner appears with the status message "Network error: Failed to upload DNS server". Resolve the error and retry the procedure.

    If you do not click Apply Changes, a yellow banner appears with the message "Note, settings which are not applied will not be saved.".

To resolve a domain into a DNS server:

  1. From the Settings menu, click Corporate DNS Servers.

  2. In the Resolve the following domains table, click +.

    The Edit Domain dialog is displayed.

  3. Enter Domain Name.

  4. Under Resolving DNS Servers, do one of the following:

    • Select the All DNS Servers option for the domain to all DNS servers.

    • Select the Specific DNS Servers option for the domain to resolve into a specific DNS server.

      • From the list of DNS server names, select one or more DNS server name check boxes.

  5. Click Save.

    The entry is added to the table.

  6. Click Apply Changes.

    A blue banner appears at the top with the status message "Corporate DNS Server change in progress". It takes approximately five minutes to apply the changes. After the system applies the changes successfully, the banner disappears.

    If the system fails to apply the changes, a red banner appears with the status message "Network error: Failed to upload DNS server". Resolve the error and retry the procedure.

    If you do not click Apply Changes, a yellow banner appears with the message "Note, settings which are not applied will not be saved.".

To resolve all domains:

  1. From the Settings menu, click Corporate DNS Servers.

  2. Select the Resolve all internet domain names checkbox.

    The Resolving DNS Servers table is disabled.

  3. Click Apply Changes.

    A blue banner appears at the top with the status message "Corporate DNS Server change in progress". It takes approximately five minutes to apply the changes. After the system applies the changes successfully, the banner disappears.

    If the system fails to apply the changes, a red banner appears with the status message "Network error: Failed to upload DNS server". Resolve the error and retry the procedure.

    If you do not click Apply Changes, a yellow banner appears with the message "Note, settings which are not applied will not be saved.".