System > CPU > Top

CPView Gauges

  1. Run: cpview

  2. From the top, click CPU > Overview > Host > refer to the section CPU.

  3. From the top, click CPU > Overview > Top-Connections > click the tabs for CoreXL instances > refer to the section Top Connections.

CLI

  • To see the CPU utilization of the CoreXL Firewall instances, run this command in the Expert mode:

    top

  • To see the top connections, run this command in the Expert mode (see sk172229):

    top_conns --help

Metric Information

Metric ID

Metric Description

Metric Type

Metric Units

Metric Labels

Metric Label Description

VSX Behavior

connection.top.cpu.utilization

CPU utilization of the CoreXL Firewall instance, in %.

This metric is available in:

  • R82 and higher

Gauge

{percent}

{'instance', 'protocol', 'connection'}

  • instance

    The number of the CoreXL Firewall instance.

  • protocol

    Protocol of the connection.

  • connection

    IP addresses of the Source and Destination.

Different data for each Virtual System.

connection.top.cpu.wt.utilization

"PPE_WT" CPU utilization of the CoreXL SND instance, in %.

For information about "PPE_WT", see Performance Tuning Administration Guide for your version > Chapter "HyperFlow".

This metric is available in:

  • R82 and higher

Gauge

{percent}

{'instance', 'protocol', 'connection'}

  • instance

    The number of the CoreXL SND instance.

  • protocol

    Protocol of the connection.

  • connection

    IP addresses of the Source and Destination.

Different data for each Virtual System.