Hardware > PSU

For information about hardware thresholds on Check Point Appliances, see sk119232.

For hardware documentation for your Check Point Appliance, see sk96246.

CPView Gauges

  1. Run: cpview

  2. From the top, click Hardware-Health > Power-Supply.

CLI

Run this command in Gaia Clish:

show sysenv ps

Metric Information

Metric ID

Metric Description

Metric Type

Metric Units

Metric Labels

Metric Label Description

VSX Behavior

hardware.power_supply

State of the PSU:

  • 0.0 - Down

  • 1.0 - Up

  • 2.0 - Empty

  • 3.0 - Dummy

This metric is available in:

  • R82 and higher

Gauge

{state}

{'name'}

  • name

    The state value.

Statistics exist only in the context of the VSX Gateway (VS0).

hardware.power_supply.state

Which PSU is used:

  • 0.0 - Secondary

  • 1.0 - Primary (default)

Gauge

{state}

{'name'}

  • name

    Primary or Secondary.

Statistics exist only in the context of the VSX Gateway (VS0).

Additional Metric

Metric ID

Metric Description

Metric Type

Metric Units

Metric Labels

Metric Label Description

VSX Behavior

hardware.power_consumption

The servers's total power consumption, in Watts.

This metric is available in:

Gauge

W

 

 

The same data for VSX Gateway (VS0) and other Virtual Systems.