set vpn remote-access enable-vpn-idle-timeout enable

In the R82.00.X releases, this command is available starting from the R82.00.10 version.

Description

Enable Remote Access VPN Idle Timeout feature. Set your Remote Access VPN session to automatically disconnect after a pre-determined period of user inactivity.

• on - Enabled

• off - Disabled

See:

• set vpn remote-access vpn-idle-timeout

• set vpn remote-access ignore-icmp-in-idle-check

In WebUI, this corresponds to:

1. In the Remote Access section of the VPN Remote Access Control page, in the VPN idle timeout option, click Configure:

2. In the Remote Access VPN Idle Timeout window, move the slider to the right to Enable VPN disconnect on user activity.

3. (missing or bad snippet).

Syntax

set vpn remote-access enable-vpn-idle-timeout enable { on | off }

Example Command

set vpn remote-access enable-vpn-idle-timeout enable on