set vpn remote-access ignore-icmp-in-idle-check

In the R82.00.X releases, this command is available starting from the R82.00.10 version.

Description

Set to ignore ICMP packets (low-value traffic) when detecting VPN activity. The pings are ignored and therefore do not keep the Remote Access VPN session alive.

  • on - Exclude ICMP packets from VPN activity detection.

  • off - Include ICMP packets in VPN activity detection.

See:

In WebUI, this corresponds to:

  1. In the Remote Access section of the VPN Remote Access Control page, in the VPN idle timeout option, click Configure.

  2. In the Remote Access VPN Idle Timeout window, select to Ignore ICMP packets when checking VPN idleness. Pings from ICMP traffic (low-value traffic) are ignored as "activity" and therefore do not keep the session alive.

  3. (missing or bad snippet).

Syntax

set vpn remote-access ignore-icmp-in-idle-check { on | off }

Example Command

set vpn remote-access ignore-icmp-in-idle-check on