Preserve Configuration

Use the Preserve Configuration window to select the settings that are NOT reset to factory default when you update the LOM firmware.

Note - Select IPMI to save the settings for the LOM users that are logged in to LOM. If not, you must log in to the card using the default account.

To save LOM settings:

1. Select Maintenance > Preserve Configuration.

   The Preserve Configuration window opens.

2. For each item, select Preserve Status to save all the settings that are related to the item.

   Preserve Configuration Item	LOM Settings	LOM Portal Page
   SEL	All system event logs	Appliance Health > Event Log
   IPMI	Time zone	Configuration > Time
   IPMI	All user settings	Configuration > User
   IPMI	Password for the default admin account	Login to Portal
   KVM	All mouse mode settings Note - This is not included in most current LOM versions.	Configuration > Mouse Mode
   KVM	KVM and Media Encryption settings	Configuration > Remote Session
   Network	All DNS settings	Configuration > DNS
   Network	All login block settings	Configuration > Login Block
   Network	All network settings	Configuration > Network
   NTP	NTP server setting	Configuration > Time
   Services	All service settings	Configuration > Services
   Authentication	All LDAP settings	Configuration > LDAP/E-Directory
   Authentication	All RADIUS settings	Configuration > RADIUS
   Authentication	All settings	Maintenance > System Administrator
   All settings for SSL certificates	All settings	Configuration > SSL

3. Click Save.

You cannot save these settings and they are reset to factory default settings when you upgrade the firmware.

LOM Settings	LOM Portal Page
All network link settings	Configuration > Network Link
Current time	Configuration > Time