Network Settings

Use the Network Settings window to configure the settings for the LOM interface on the appliance:

  1. Select Configuration > Network.

    The Network Settings window opens.

  2. Configure the settings for LOM interface.

    Field

    Description

    LAN Interface

    Shows the interface that is used to connect to LOM.

    Note - This field does not exist in newer LOM F/W versions.

    LAN Settings

    Enables the LOM interface.

    Note - This field does not exist in newer LOM F/W versions.

    MAC Address

    Shows the MAC address of the LOM interface.

    IPv4 Configuration

    Obtain an IP address automatically

    • When Use DHCP is selected, LOM gets an IPv4 address from the DHCP server

    • When Use DHCP is cleared, enter the following settings for the LOM interface

    IPv4 Address

    Configures the IPv4 address for the LOM interface

    Subnet Mask

    Configures the subnet mask value for the LOM interface

    Default Gateway

    Configures the IPv4 address for the default gateway

  3. Click Save.

Note - Using DHCP or entering a different IP address manually may cause the loss of connectivity with the LOM WebUI.