Mounting the Appliances in a Rack

You can install your 19100 / 19200 / 29100 / 29200 Appliance with the Telescopic Rails hardware. See Rack Mounting for Check Point Appliances for the procedure.

Appliance Specifications

Appliance	Regulated Model	Width	Depth	Height	U	Maximum Operating Temperature	AC PSU Electrical Specifications	DC PSU Electrical Specifications
19100	RR1-CP-15	17.40 in (44.2 cm)	24.01 in (61.0 cm)	3.46 in (8.8 cm)	2U	32°F - 104°F 0°C - 40°C	From 100V (10A) to 240V (5A), 47 - 63Hz	Range #1: -36V to -46V, maximum of 35A, maximum power output is 1000W Range #2: -46V to -72V, maximum of 40A, maximum power output is 1600W
19200	RR1-CP-25	17.40 in (44.2 cm)	24.01 in (61.0 cm)	3.46 in (8.8 cm)	2U	32°F - 104°F 0°C - 40°C	From 100V (10A) to 240V (5A), 47 - 63Hz	Range #1: -36V to -46V, maximum of 35A, maximum power output is 1000W Range #2: -46V to -72V, maximum of 40A, maximum power output is 1600W
29100	RR1-CP-10	17.40 in (44.2 cm)	24.01 in (61.0 cm)	3.46 in (8.8 cm)	2U	32°F - 104°F 0°C - 40°C	From 100V (13.8A) to 240V (8.5A), 47 - 63Hz	Range #1: -36V to -46V, maximum of 35A, maximum power output is 1000W Range #2: -46V to -72V, maximum of 40A, maximum power output is 1600W
29200	RR1-CP-20	17.40 in (44.2 cm)	24.01 in (61.0 cm)	3.46 in (8.8 cm)	2U	32°F - 104°F 0°C - 40°C	From 100V (13.8A) to 240V (8.5A), 47 - 63Hz	Range #1: -36V to -46V, maximum of 35A, maximum power output is 1000W Range #2: -46V to -72V, maximum of 40A, maximum power output is 1600W

Appliance Air Vents

When the appliance is mounted in a rack, make sure that the appliance air vents have sufficient airflow from front to rear.

Important - If the appliance vents are blocked, the appliance can become too hot and be damaged.

The appliance and rack rails were tested in extreme conditions and when properly installed do not block air flow to the appliance.

These appliances are specifically designed to install with these rails.

The appliance shown is 19200, but the air flow is the same for all appliances.