Monitoring RAID Status and Synchronization

To monitor the RAID status of the disks - CLI:

  1. Connect to the command line on the appliance.

  2. To monitor the RAID status of the disks, run:

    • raid_diagnostic

      This command shows data about RAID and the disks on a Smart-1 appliance when the RAID array is optimal.

      If a disk synchronizes, it shows what percent is complete.

    • cpstat os -f raidInfo

      This command shows the RAID array status on a Smart-1 appliance in tabular format.

To monitor the RAID status of the disks - Gaia Portal:

In the Gaia Portal, go to Maintenance -> RAID Monitoring.