Smart-1 625 Installing and Removing Memory

This document is for the Smart-1 625 Security Management appliance.

Safety Instructions

• Lift the appliance with assistance. To avoid injury, do not attempt to lift the appliance by yourself.

• Opening or removing the appliance cover, while the appliance is powered on may expose you to a risk of electric shock.

• Do not operate the appliance without the cover for more than five minutes.

• Operating the appliance without the cover can result in component damage.

• Many repairs may only be done by a certified service technician. Only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the technical support.

• We recommend that you always use an antistatic mat and antistatic strap on your wrist, while working on components inside the appliance.

• For proper heat dissipation and cooling, Smart-1 625 appliances contain a cooling air shroud that covers the memory module sockets.

For more information, see the Enterprise Products Safety, Environmental, and Regulatory Information booklet supplied in the original appliance shipping carton.

Important - We recommend that only experienced personnel install or remove hardware components. Installing or removing components incorrectly can permanently damage the Security ManagementAppliance

Important - Make sure that you are electromagnetically grounded when working with hardware components of the appliance. ESD (electrostatic discharge) can damage the appliance.