Mounting the Appliances in a Rack

You can install your Smart-1 600-S appliance with the fixed rails or telescopic rails hardware (optional). See the Installing the Quantum Smart-1 600-S Telescopic Rails booklet for the procedure.

Appliance Physical Specifications

These are the physical specifications of the Check Point appliance.

Appliance

Regulated Model

Width

Depth

Height

Maximum Operating Temperature

Electrical Specifications

Smart-1 600-S

QS-2

17.24 in
(43.80 cm)

20 in
(50.80 cm)

1.73 in
(4.40 cm) (1U)

32° to 104°F

0° to 40°C

100-240V~

47-63Hz

2.5A – 1.5A

Appliance Air Vents

Make sure that the appliance air vents have sufficient airflow from front to rear when the appliance is mounted in a rack.

Important - If the appliance vents are blocked, the appliance can become too hot and it can be damaged.

Warning - This is a Class A product. It may cause electromagnetic interference. You may be required to take practical measures against the interference.

The appliance and rack rails have been tested in extreme conditions and do not block air flow to the appliance. These appliances are specifically designed to install with these rails.

The air flow in Smart-1 600-S appliances: