Restoring in the Gaia Clish

To restore the appliance in the Gaia Clish:

1. Connect to the command line on the appliance - over SSH, or console.

2. Log in to Gaia Clish.

3. Run this command:

   set fcd revert <image_name>

   A "Reverting to factory defaults" message appears.

   Example:

   Gaia> set fcd revert Gaia_R81
Warning! This command will erase all the current configuration on this appliance and will revert it to the selected image.
Are you sure you want to continue such action? (Yes/No) [No]
yes

   Reverting to factory defaults Gaia_R81
Gaia>
   

   INIT: Sending processes the TERM signal