Time Zone

Configure the Time Zone settings for the specified plans and gateways.

This feature is only supported on R77.20 and higher gateways.

To configure the Time Zone settings of a plan:

  1. Go to Home > Plans.

  2. Click the plan name.

    The Edit page opens.

  3. Click Device Settings > Time Zone.

  4. Select Manage in SMP.

  5. In the Local Time Zone list, select the correct time zone option.

  6. Select Automatically adjust clock for daylight saving changes to enable automatic daylight saving changes.

  7. Click Save.

To override the Time Zone settings set by a plan:

  1. Go to Home > Gateways.

  2. Click the gateway name.

    The Edit page opens.

  3. Click Device Settings > Time Zone.

  4. If the Time Zone settings are locked, click Unlock from plan.

  5. To stop remote management of the blade, clear Manage in SMP.

  6. Configure the Time Zone settings (see above).

  7. Click Save.

To connect to the appliance:

  1. Go to Home > Gateways.

  2. Click the gateway name.

    The Edit page opens.

  3. Click Device Settings > Time Zone.

  4. Click Access Gateway: Date and Time.

    A browser page opens and shows the progress of the SMP connection to the gateway. The appliance opens on the Date and Time page. You can now update the local appliance.

    Note - If a local administrator is already logged in to the appliance, click OK to override that connection. Click Cancel to cancel your login attempt.