Configuring Setup Settings

Use the Setup page to define SMP access.

  • Administrators Access - To let SMP administrators access appliances over HTTPS and SSH, add IP addresses to this table.

  • Gateways behind NAT - A gateway that connects to the Internet behind a NAT device does not have a publicly accessible IP address.

To configure SMP for gateway IP address access:

  1. On the NAT device, configure port forwarding for the required ports:

    • Local admin access = 4434

    • Push to gateway = 18209

      These are default values.

  2. Enter the ports here.

Note - These settings are available from the Gateways and Plans tabs.