Configuring Logging for Service Domains

Use the SMP to configure logging:

• Configure the severity of the generated logs.

• Forward logs to an external Syslog server.

• Delete old logs.

Note - The logging settings for the SMP do not change the Gateway logs.

To configure logging for a Service Domain:

1. Go to Service Domain > Settings.

   The Settings page opens and shows the General tab.

2. Click Logging.

3. In the Log Level, select the minimum severity that generates logs.

To configure the server as a Syslog client for logs from the Service Domain:

1. Click Forward logs to an external Syslog Server.

2. In Syslog Server, enter the IP address of the Syslog server.

3. In Syslog Port, enter the port number that is used to send the logs.

To delete old logs:

1. Click Purge old logs.

2. In Older than, enter the maximum number of days that logs are saved.

3. In Action

   • Select Delete to automatically delete old logs are deleted from the server.

   • Select Archive to archive old logs on the server.

4. Click Save.