Administrators Access

Add IP addresses or a network to the Administrators Access table to access appliances over HTTPS and SSH. All gateways subscribed to the plan take their administrator access settings from the plan, by default.

You can override the administrator access settings set by a plan. You must first unlock the administrator access settings from the plan.

To configure administrator access for a plan:

1. Go to Home > Plans.

2. Click the plan name.

   The Edit page opens.

3. Click Setup > Administrators Access.

4. Click New.

   The Administrator Access page opens.

5. Select the Source Type (Network or IP Address).

6. Enter the IP Address.

7. For a network source type, enter a Subnet Mask.

8. Click Finish.

   The details are shown in a table in the Administrators Access window.

9. Click Save.

To override administrator access set by a plan:

1. Go to Home > Gateways.

2. Click the gateway name.

   The Edit page opens.

3. Click Setup > Administrators Access.

4. If Administrators Access is locked, click Unlock from plan.

5. Click New.

   The Administrator Access page opens.

6. Configure the options (see above).

7. Click Save.

To delete an IP address from the list:

1. Select the IP address.

2. Click Delete.

3. Click OK in the confirmation message.

4. Click Save.