show voip

In the R81.10.X releases, this command is available starting from the R81.10.10 version.

Description

Shows the configured VoIP settings.

See set voip.

Syntax

show voip

Example Output

MyGW> show voip
is-active:                    false
use-sip-provider:             true
sip-provider-name:            SIP-Provider
log-sip-provider-traffic:     false
disable-sip-inspection:       false
use-pbx:                      false
phones-name:                  IP-Phones
pbx-provider-ipv4Address:
allow-pbx-management-from-internet:true
use-vpn-site-to-site-phones:  false
use-vpn-remote-access-phones: false
use-public-phones:            false
external-phones-name:         External-IP-Phones

MyGW>