show snmp traps enabled-traps
In the R81.10.X releases, this command is available starting from the R81.10.00 version.
Description
Shows the supported SNMP traps and their configuration.
See show snmp traps enabled-traps.
Syntax
|
|
Example Output
HostName> show snmp traps enabled-traps
trap-name monitored-obj threshold-operand threshold severity repetitions repetitions-delay trap-oid trap-desc
interface-disconnected Interface l... 4 1 30 1.3.6.1.4.1.2620.1.2000.1.1 Either network cable was disconnected, ICMP mon...
VLAN removed VLAN removal 4 1 30 1.3.6.1.4.1.2620.1.2000.1.2 VLAN was removed from interface
high-memory-utilization emory utili... gt 90 4 1 30 1.3.6.1.4.1.2620.1.2000.4.2 Memory utilization exceeded the threshold value
low-disk-space Free disk s... eq-lt 10 4 1 30 1.3.6.1.4.1.2620.1.2000.2.1 Disk partition free space went below the thresh...
high-connections-rate Connection ... eq-gt 3000 4 1 30 1.3.6.1.4.1.2620.1.2000.1.3 New connection rate exceeded the threshold value
high-concurrent-connections Concurrent ... eq-gt 50000 4 1 30 1.3.6.1.4.1.2620.1.2000.1.4 The number of concurrent connections exceeded t...
high-firewall-throughput Firewall th... eq-gt 1000 4 1 30 1.3.6.1.4.1.2620.1.2000.1.5 Firewall throughput exceeded the threshold value
high-accepted-packet-rate Accepted pa... eq-gt 100000 4 1 30 1.3.6.1.4.1.2620.1.2000.1.6 Accepted packet rate exceeded the threshold value
connection-with-log-server-... Connection ... 4 1 30 1.3.6.1.4.1.2620.1.2000.7.2 Unable to send logs to log server
4 1 30 1.3.6.1.4.1.2620.1.2000.5.1.1
4 1 30 1.3.6.1.4.1.2620.1.2000.5.2.1
4 1 30 1.3.6.1.4.1.2620.1.2000.5.3.1
4 1 30 1.3.6.1.4.1.2620.1.2000.5.4.1
HostName>
|