show os-settings advanced-settings

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Shows the values of some of the advanced appliance settings.

In WebUI, this corresponds to:

Click the Device view > Advanced section > Advanced Settings page.

Syntax

show os-settings advanced-settings

Example Output

gps-enable:                   false
gps-log-host-name:
enable-pppoe-dst-check:       false
enable-net-switch-flow-control:false
disable-wifi-association-logs:false
use-secondary-mccmnc-file:    false
duplicate-mac-detection-switch-ports:none
sim-switch-on-lower-tech-min-allowed-tech:
cellular-modem-detect-timeout:120
sim-switch-on-lower-tech-enable:false
gps-log-interval:             60
gps-logs-enable:              false
sim-switch-on-lower-tech-delay:0
enable-jumbo-frames:          false
drop-cellular-mismatched-source-ip-packets:false
cellular-reset-modem-after-detect-failed:true
ipv6-prefix-selection-mode:   router-pref-oldest
default-route-rank:           60
force-cellular-4g:            false
cellular-network:             auto
cellular-connection-establish-timeout:60
gps-log-addr:
enable-lan-on-wan:            false
disable-dhcp-options-transfer:false
backoff-mode:                 auto
sim-switch-on-data-usage-enable:false
gps-log-protocol:             udp
enable-wifi-monitors:         false
use-conn-mon-unique-icmp-id:  false
gps-log-port:                 514
enable-automatic-wifi-channel-change:false