show netflow collector

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Shows configuration of a specific NetFlow collector.

In addition, see:

• show netflow collectors

• Configuring NetFlow Settings

Syntax

show netflow collector ip [Press TAB to select the configured IPv4 Address of Collector] port [Press TAB to select the configured Destination Port on Collector]

Parameters

Parameter	Description
ip <IPv4 Address of Collector>	Selects the configured NetFlow Collector by its destination IPv4 address.
port <Destination Port on Collector>	Selects the configured NetFlow Collector by its destination UDP port number. Type: Port number

Example Command

show netflow collector ip 192.168.22.33 port 8080