set vpn site add remote-site-enc-dom-route-excluded-network-obj

In the R81.10.X releases, this command is available starting from the R81.10.05 version.

Description

Adds ability to exclude a network object or a particular IP address from being encrypted and sent through the site when "Route all traffic" is configured.

Note - You must first create the site and the network object.

See set vpn site add remote-site-enc-dom-network-obj.

Syntax

set vpn site <site> add remote-site-enc-dom-route-excluded-network-obj <network_object_name>

Parameters

Parameter	Description
site	Specifies the Site name. Press the TAB key to see the available options.
network_object_name	Specifies the Network Object to exclude. Press the TAB key to see the available options.

Parameter

Description

site

Specifies the Site name.

Press the TAB key to see the available options.

network_object_name

Specifies the Network Object to exclude.

Press the TAB key to see the available options.

Example Command

set vpn site site17 add remote-site-enc-dom-route-excluded-network-obj MyEncDomNetwork