set internet-connection type pppoa / eoa

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures advanced settings for an existing internet connection.

This command is available only for hardware that contains a DSL port.

Syntax

set internet-connection "<name>" type pppoa [ method <method> ] [ idle-time <idle-time> ] [ standard <standard> ]

set internet-connection "<name>" type eoa [ vpi <vpi> ] [ vci <vci> ] [ encapsulation {llc | vcmux} ] [ wan-ipv4-address <wan-ipv4-address> { wan-subnet-mask <wan-subnet-mask> | wan-mask-length <wan-mask-length> } default-gw <default-gw> ] [ standard <standard> ]

Parameters

Parameter	Description
name	Connection name
type	Connection type Press TAB to see available options
default-gw	WAN default gateway (in the advanced section of PPTP and L2TP)
idle-time	Disconnect idle time in seconds
method	Authentication method Options: auto, pap, chap
wan-ipv4-address	WAN IP address wrapper An IP address, or 'auto'
wan-mask-length	WAN subnet mask length
wan-subnet-mask	WAN subnet mask (in the advanced section)
encapsulation	Encapsulation for the ADSL connection
vci	VCI value for the ADSL connection A number between 0 and 65535
vpi	VPI value for the ADSL connection A number between 0 and 255
standard	The ADSL standard to use Options: multimode, t1413, glite, gdmt, adsl2, adsl2+

Example Command

set internet-connection "My connection" type pppoa method auto idle-time 60 standard multimode