set internet-connection probe-servers

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Enables or disables the probing of the configured servers on the Internet for an existing internet connection.

Note - You configure the probing servers with these commands:

In WebUI, this corresponds to:

  1. Click the Device view > Network section > Internet page.

  2. To configure the probing servers, click the Configure monitoring link.

  3. Edit an Internet connection.

  4. Click the Connection Monitoring tab.

  5. Refer to the checkbox Monitor connection state by sending probe packets to the specified server on the Internet.

  6. Click Save.

See:

Syntax

set internet-connection <Name> probe-servers {on | off}

Parameters

Parameter

Description

name

Name of the Internet connection.

Press the TAB key to see the available options.

probe-next-hop

Enables (on) or disables (off) the probing of the servers.

Example Command

set internet-connection "My connection" probe-servers on