set internet-connection type l2tp

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures settings for an existing internet connection.

Syntax

set internet-connection "<name>" type l2tp username <username> { password <password> | password-hash <password-hash> } [ local-ipv4-address <local-ipv4-address>] server <server> [ local-ipv4-address <local-ipv4-address> ] [ wan-ipv4-address <wan-ipv4-address> { wan-subnet-mask <wan-subnet-mask> | wan-mask-length <wan-mask-length> } default-gw <default-gw> ]

Parameters

Parameter	Description
name	Connection name
type	Connection type Press TAB to see available options
ipv4-address	IP address field (for static IP and bridge settings)
mask-length	Subnet mask length
subnet-mask	Subnet mask A subnet mask, or 255.255.255.255
default-gw	Default gateway
local-ipv4-address	Local tunnel IP address or Auto for automatic An IP address, or '`auto`'
server	Server IP address
password	Password for PPP connection or cellular modem settings
password-hash	The hash of the user password
username	User name for PPP connection or cellular modem settings Usually <username>@<ISP>
wan-ipv4-address	WAN IP address wrapper An IP address, or '`auto`'
wan-mask-length	WAN subnet mask length
wan-subnet-mask	WAN subnet mask (in the advanced section)