set interface ipv6-address

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures an IPv6 address on the local interface / connection.

See:

Syntax

set interface <name> ipv6-address <ip6-address> ipv6-prefix-length <ipv6-prefix-length>

Parameters

Parameter

Description

name

Specifies the interface / connection.

Press the TAB key to see the available options.

ipv6-address

Configures the IPv6 address of the interface.

ipv6-prefix-length

Configures the IPv6 prefix length.

Example Command

set interface My_Network ipv6-address 2001:db8:3333:4444:5555:6666:7777:8888 ipv6-prefix-length 64