set advanced-settings ipip-enabled

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Enables or disables the IPIP feature.

IPIP, a variation of DS-Lite, is used to tunnel IPv4 traffic over IPv6-only networks. As in DS-Lite, the IPv4 traffic is tunneled over an existing IPv6 connection.The DS-Lite/IPIP tunnel is created between the client (Quantum Spark Gateway) and a peer ("AFTR" that resides on the ISP side and is configured statically or acquired via DHCPv6).

Note - Before you can configure the IPIP feature on a specific internet connection, you must enable the IPIP feature in the Advanced Settings.

Syntax

set advanced-settings ipip-enabled { on | off }

Parameters

Parameter	Description
ipip-enabled	Enables (on) or disables (off) the IPIP feature.

Example Command

set advanced-settings ipip-enabled on