fwaccel stat

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

The "fwaccel stat" and "fwaccel6 stat" commands show this information about SecureXL on the local Security Gateway, or Cluster Member:

  • SecureXL instance ID

  • SecureXL instance role

  • SecureXL status

  • Accelerated interfaces

  • Accelerated features (and information about the Cryptography feature)

In addition, it shows:

  • The status of Accept Templates

  • The status of Drop Templates

  • The status of NAT Templates

Note - Ignore the row "LightSpeed Accel".

Important - In a Cluster, you must configure all the Cluster Members in the same way.

Syntax for IPv4

fwaccel stat

Syntax for IPv6

fwaccel6 stat

Example

[Expert@MyGW]# fwaccel stat
+---------------------------------------------------------------------------------+
|Id|Name     |Status     |Interfaces               |Features                      |
+---------------------------------------------------------------------------------+
|0 |KPPAK    |enabled    |WAN,LAN1,LAN2,SYNCBOND   |Acceleration,Cryptography     |
|  |         |           |                         |                              |
|  |         |           |                         |Crypto: Tunnel,UDPEncap,MD5,  |
|  |         |           |                         |SHA1,3DES,DES,AES-128,AES-256,|
|  |         |           |                         |ESP,LinkSelection,DynamicVPN, |
|  |         |           |                         |NatTraversal,AES-XCBC,SHA256, |
|  |         |           |                         |SHA384,SHA512                 |
+---------------------------------------------------------------------------------+

Accept Templates : enabled
Drop Templates   : disabled
NAT Templates    : enabled
LightSpeed Accel : disabled

[Expert@MyGW]#