fwaccel off

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

The "fwaccel off" and "fwaccel6 off" commands stop the SecureXL on-the-fly.

You can stop the SecureXL only temporarily.

The SecureXL starts automatically when you start Check Point services (with the cpstart command), or reboot the Security Gateway.

Important:

  • In a Cluster, you must configure all the Cluster Members in the same way.

  • Disable the SecureXL only for debug purposes, if Check Point Support explicitly instructs you to do so.

  • If you disable the SecureXL, this change does not survive reboot.

    SecureXL remains disabled until you enable it again on-the-fly, or reboot the Security Gateway.

  • If you disable the SecureXL, this change applies only to new connections that arrive after you disable the acceleration.

    SecureXL continues to accelerate the connections that are already accelerated.

    Other non-connection oriented processing continues to function (for example, virtual defragmentation, VPN decrypt).

Syntax for IPv4

fwaccel off [-q]

Syntax for IPv6

fwaccel6 off [-q]

Parameters

Parameter

Description

-q

Suppresses the output (does not show a returned output).

Example 1 - Output from a non-VSX Gateway

[Expert@MyGW]# fwaccel off
SecureXL device disabled.
[Expert@MyGW]#