drSMB diag performance
In the R81.10.X releases, this command is available starting from the R81.10.05 version.
Description
Generates a report with general information about the gateway performance.
To get this report in WebUI, click the Home view > in the Troubleshooting section, click the Dr. Spark page > click Dr. Spark - Load.
Syntax
|
|
Parameters
|
Step |
Instructions |
|---|---|
|
|
You can specify the test duration. The default test duration is 10 seconds. |
Example Output
[Expert@MyGW]# drSMB diag performance 2024-03-17_19-51-35 Running the performance test, output will be displayed in about 30 sec. Gateway Performance: Number of hosts: 0 Number of connections: 12 Connection rate: 11 per second Throughput: Receive: 16458 Kbps Transmit: 1343 Kbps Packet Rate: Receive: 206 packets per second Transmit: 16 packets per second SSL is disabled -----Blade Status----- Blade IPS is disabled Blade AV is disabled Blade AB is disabled Blade TE is disabled Blade ASPAM is disabled VPN-RA is active VPN-S2S is disabled NGTP is disabled ----CPU and Memory---- Average available CPU is 98.36% Available CPU on CPU 1 is 98.37% Available CPU on CPU 2 is 98.31% Available CPU on CPU 3 is 98.42% Available CPU on CPU 4 is 98.34% Available memory on the gateway: 6325296 KB Fw1 memory consumption: 6% SFWD memory consumption: 111784 KB [Expert@MyGW]# |