set dsl advanced-settings standards
In the R81.10.X releases, this command is available starting from the R81.10.00 version.
Description
Set DSL standard related configuration parameters.
Syntax
|
Parameters
Parameter |
Description |
---|---|
vdsl2 |
Supports ITU G.993.2 VDSL2 standard. |
dmt |
Supports ITU G.992.1 ADSL (G.dmt) standard. |
adsl-lite |
Supports ITU G.992.2 ADSL Lite (G.lite) standard. |
adsl2 |
Supports ITU G.992.3 ADSL2 standard. |
adsl2plus |
Supports ITU G.992.5 Annex M ADSL2+M standard. |
t1413 |
Supports ANSI T1.413-1998 Issue 2 ADSL. |
annex-m |
In an Annex A appliance: Combined with supported ADSL2+ it specifies support for Annex M ADSL2+. In an Annex B appliance: Combined with supported ADSL2 it specifies support for Annex J ADSL2. |
annex-l |
Combined with enabled ADSL2 (G.992.3) specifies support for Annex L. |
vdsl-8a |
Supports VDSL Profile 8a. |
vdsl-8b |
Supports VDSL Profile 8b. |
vdsl-8c |
Supports VDSL Profile 8c. |
vdsl-8d |
Supports VDSL Profile 8d. |
vdsl-12a |
Supports VDSL Profile 12a. |
vdsl-12b |
Supports VDSL Profile 12b. |
vdsl-17a |
Supports VDSL Profile 17a. |
vdsl-us0 |
Enables usage of first upstream band in VDSL2. |
Example Command
|