set serial-port active-mode

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures the physical serial port as a relay to outgoing connection to a remote TELNET server.

Syntax

set serial-port active-mode [ tcp-port <tcp-port> ] [ primary-server-address <primary-server-address> ] [ secondary-server-address <secondary-server-address> ]

Parameters

Parameter	Description
n/a

Example Command

set serial-port active-mode tcp-port 8080 primary-server-address myHost.com secondary-server-address myHost.com