set serial-port

In the R81.10.X releases, this command is available starting from the R81.10.00 version.

Description

Configures the physical serial port data flow settings.

Syntax

set serial-port [ port-speed <port-speed> ] [ flow-control <flow-control> ] [ disabled <disabled> ] [ mode <mode> ]

Parameters

Parameter	Description
disabled	Indicates if the serial port is disabled
flow-control	Indicates the method of data flow control to and from the serial port
mode	Indicates if the serial port is used to connect to the appliance's console, a remote telnet server or allow a remote telnet connection to the device connected to the serial port.
port-speed	Indicates the port speed (Baud Rate) of the serial connection

Example Command

set serial-port port-speed 9600 flow-control rts-cts disabled on mode console