Smart Accel

On the Smart Accel page, you can bypass the network inspection for specific objects:

  • Services - Includes Corporate Services, Media Streaming Services, Social Media Services, and Web Conferencing applications.

  • Assets - Devices such as a computer, audio player, or alarm (from R81.10.05).

This improves connectivity and optimizes the load on the Quantum Spark Security GatewayClosed A dedicated Check Point server that runs Check Point software to inspect traffic and enforce Security Policies for connected network resources..

Important - You cannot use Smart Accel and SSL Inspection at the same time.

Configuring Smart Accel in R81.10.05 and higher

Smart Accel for Services

Note - Smart Accel for Services is enabled ("On") by default.

  1. Go to the Access Policy view > Firewall section > Smart Accel page.

  2. In the section Smart Accel Services, click the Off toggle.

    Wait for the toggle to change to On.

  3. To the right of the On/Off toggle, click the services link that appears in one of these sentences:

    • All services selected

    • X/Y services selected

    The Smart Accel Services window opens.

    By default, all the services are selected.

  4. If it is necessary to inspect a service, then clear its checkbox.

    If it is necessary to bypass the inspection for a service, then select its checkbox.

  5. Click Apply

  1. Go to the Access Policy view > Firewall section > Smart Accel page.

  2. In the section Smart Accel Services, click the On toggle.

    Wait for the toggle to change to Off.

Smart Accel for Assets

Note - In the R81.10.X releases, this feature is available starting from the R81.10.05 version.

Note - Smart Accel for Assets is disabled ("Off") by default.

  1. Go to the Access Policy view > Firewall section > Smart Accel page.

  2. In the section Smart Accel Assets, click the Off toggle.

    Wait for the toggle to change to On.

  3. To the right of the On/Off toggle, click the assets link that appears in one of these sentences:

    • All assets selected

    • X/Y assets selected

    The Smart Accel Services window opens.

    By default, none of the assets are selected.

  4. If it is necessary to inspect an asset, then clear its checkbox.

    If it is necessary to bypass the inspection for an asset, then select its checkbox.

  5. Click Apply

  1. Go to the Access Policy view > Firewall section > Smart Accel page.

  2. In the section Smart Accel Assets, click the On toggle.

    Wait for the toggle to change to Off.

  1. Go to the Access Policy view > Firewall section > Smart Accel page.

  2. In the section Smart Accel Assets, click the Bypass by MAC link.

  3. WebUI opens the Logs & Monitoring view > Status section > Active Devices page.

Configuring Smart Accel in R81.10.00

  1. Go to the Access Policy view > Firewall section > Smart Accel page.

  2. Click the On toggle.

  3. To the right of the On/Off toggle, click the services link that appears in one of these sentences:

    • All services selected

    • X/Y services selected

    The Smart Accel Services window opens.

    By default, all the services are selected.

  4. If it is necessary to inspect a service, then clear its checkbox.

  5. Click Apply

  6. At the bottom of the page, click Apply.

  1. Go to the Access Policy view > Firewall section > Smart Accel page.

  2. Click the Off toggle.

  3. At the bottom of the page, click Apply.