set internet-connection type pppoe / ipoe

Description

Configures advanced settings for an existing internet connection.

This command is available only for hardware that contains a DSL port.

Syntax

set internet-connection "<name>" type pppoe [ username <username> ] [ { password <password> | password-hash <password-hash> } ] [ use-connection-as-vlan vlan-id <vlan-id> ] [ local-ipv4-address <local-ipv4-address> ] [ is-unnumbered-pppoe {true | false} ] [ vpi <vpi> ] [ vci <vci> ] [ encapsulation {llc | vcmux} ] [ method <method> ] [ idle-time <idle-time> ] [ standard <standard> ]

set internet-connection "<name>" type ipoe-static ipv4-address <ipv4-address> { subnet-mask <subnet-mask> | mask-length <mask-length> } default-gw <default-gw>[ dns-primary <dns-primary>] [ dns-secondary <dns-secondary> ] [ dns-tertiary <dns-tertiary> ] [ use-connection-as-vlan vlan-id <vlan-id> ] [ vpi <vpi> ] [ vci <vci> ] [ encapsulation {llc | vcmux} ]

set internet-connection "<name>" type ipoe-dynamic [ use-connection-as-vlan vlan-id <vlan-id> ] [ vpi <vpi>] [ vci <vci> ] [ encapsulation {llc | vcmux} ]

Parameters

Parameter	Description
name	Connection name
type	Connection type Press TAB to see available options
default-gw	Default gateway
dns-primary	First DNS server IP address
dns-secondary	Second DNS server IP address
dns-tertiary	Third DNS server IP address
idle-time	Disconnect idle time in seconds
ipv4-address	IP address field (for static IP and bridge settings)
is-unnumbered-pppoe	Unnumbered PPPoE lets you manage a range of IP addresses and dial only once
username	User name for PPP connection or cellular modem settings Usually <username>@<ISP>
password	Password for PPP connection or cellular modem settings
password-hash	The hash of the user password
local-ipv4-address	Local tunnel IP address or Auto for automatic An IP address, or '`auto`'
mask-length	Subnet mask length
subnet-mask	Subnet mask A subnet mask, or 255.255.255.255
isVlan	This interface is VLAN
method	Authentication method Options: auto, pap, chap
encapsulation	Encapsulation type for the ADSL connection
vci	VCI value for the ADSL connection A number between 0 and 65535
vpi	VPI value for the ADSL connection A number between 0 and 255
vlan-id	VLAN ID A number with no fractional part (integer)
standard	The ADSL standard to use Options: multimode, t1413, glite, gdmt, adsl2, adsl2+

Example

set internet-connection "My connection" type pppoe username MyUsername@MyISP password internetPassword true vlan-id 200 local-ipv4-address auto is-unnumbered-pppoe true vpi 42 vci 42 encapsulation llc method auto idle-time 60 standard multimode