set service-system-default NNTP
Description
Configures settings of the built-in NNTP service object.
Syntax
|
|
Parameters
|
Parameter |
Description |
|---|---|
|
aggressive-aging-enable |
Enable to manage the connections table capacity and memory consumption of the firewall to increase durability and stability |
|
aggressive-aging-timeout |
Time (in seconds) before the aggressive aging times out |
|
delay-sync-interval |
Time (in seconds) after connection initiation to start synchronizing connections |
|
disable-inspection |
Disable deep inspection of traffic matching this service Type: Boolean (true/false) |
|
keep-connections- open-after-policy- installation |
True to keep connections open after policy has been installed, even if they are not allowed under the new policy |
|
port |
Destination ports (a comma separated list of ports/ranges) Type: Port range |
|
session-timeout |
Time (in seconds) before the session times out |
|
source-port |
Source port |
|
sync-connections-on-cluster |
Enables state-synchronized High Availability or Load Sharing on a ClusterXL or OPSEC-certified cluster. Of the services allowed by the Rule Base, only those with synchronize connections on cluster will be synchronized as they pass through the cluster |
|
sync-delay-enable |
True to delay connections synchronization |
|
use-source-port |
Use source port |
Example
|
|
