Viewing VPN Tunnels
In the VPN Tunnels page you can see current VPN tunnels opened between this gateway and remote sites. Some sites are configured so tunnels are established only when necessary and some are configured with permanent tunnels. When the appliance is managed by Cloud Services, this table also shows the tunnels for the gateways in the community.
This page is commonly used to see the permanent tunnels. The table shows each tunnel's details when there is an active VPN tunnel.
|
Field |
Description |
|---|---|
|
From |
Host name or IP address of the tunnel’s source gateway. |
|
Site Name |
Name of the VPN site name. |
|
Peer Address |
Host name or IP address of the tunnel’s destination gateway. |
|
Community Name |
If the gateways are part of a community configured by Cloud Services, the community name with which the tunnel is associated. |
|
Status |
VPN tunnel status indication. |
To filter the list:
In the Type to filter box, enter the filter criteria.
The list is filtered.
To refresh the list:
Click Refresh to manually refresh this page with updated tunnel information.
Note - This page is available from the VPN and Logs & Monitoring tabs.