asg_version

This command is supported only on:

  • Scalable Chassis

Note - You can run this command in Gaia gClish or in the Expert mode.

Description

  • Shows this information:

    • Check Point software version on the Security Gateway Modules (SGMs).

    • Firmware versions on the Security Gateway Modules (SGMs), Security Switch Modules (SSMs), and Chassis Management Modules (CMMs).

  • Makes sure that system hardware components run approved software and firmware versions.

Related Commands

Syntax

asg_version -h

asg_version [verify] [-v] [-i] [-b <SGM IDs>]

Parameters

Parameter

Description

-h

Shows the built-in help.

verify

Makes sure that system hardware components run approved software and firmware versions.

-i

Shows Active and Standby SGMs.

-b <SGM IDs>

Applies to Security Group Members as specified by the <SGM IDs>.

<SGM IDs> can be:

  • No <SGM IDs> specified, or all

    Applies to all Security Group Members and all Sites

  • One Security Group Member (for example, 1_1)

  • A comma-separated list of Security Group Members (for example, 1_1,1_4)

  • A range of Security Group Members (for example, 1_1-1_4)

  • One Site (chassis1, or chassis2)

  • The Active Site (chassis_active)

-v

Shows verbose version information.

Examples

[Expert@SG-s01-01:0]# asg_version

SGMs
======
OS version
----------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
OS build 776, OS kernel version 4.18.0-372.9.1cpx86_64, OS edition 64-bit

Hardware
--------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
BIOS: 2.28 BL: 1.00 IPMC: 1.02 FPGA: 2.34 NVRAM: 6.00

[Expert@SG-s01-01:0]#
 
[Expert@SG-s01-01:0]# asg_version -v
+-------------------------------------------------------------------------------+
| Hardware Versions                                                             |
+-------------------------------------------------------------------------------+
| Component       | Type            | Configuration      | Firmware             |
+-------------------------------------------------------------------------------+
| Chassis 1                                                                     |
+-------------------------------------------------------------------------------+
| SSM1            | SSM440          | N/A                | 5.5.R5.7.CP          |
| SSM2            | SSM440          | N/A                | 5.5.R5.7.CP          |
| CMM             | N/A             | N/A                | 3.70-rev6            |
+-------------------------------------------------------------------------------+

SGMs
======
Type
----------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
SGM400

OS version
----------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
OS build XXX, OS kernel version 4.18.0-372.9.1cpx86_64, OS edition 64-bit

FireWall-1 version
------------------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
This is Check Point's software version R82 - Build XXX
kernel: R82 - Build XXX

Performance Pack version
------------------------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
This is Check Point Performance Pack version: R82 - Build XXX
Kernel version: R82 - Build XXX

Installed Bundles
-----------------
-*- 1 blade: 1_01 -*-
BUNDLE_CORE_FILE_UPLOADER_AUTOUPDATE ...<truncated>
-*- 3 blades: 1_02 1_03 1_04 -*-
BUNDLE_CORE_FILE_UPLOADER_AUTOUPDATE ...<truncated>

Hardware
--------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
BIOS: 2.28 BL: 1.00 IPMC: 1.02 FPGA: 2.34 NVRAM: 6.00

SSD
---
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
Firmware Version: N2010112

Number of cores
---------------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
56

Number of CoreXL instances
--------------------------
-*- 4 blades: 1_01 1_02 1_03 1_04 -*-
52

CPUs frequency
--------------
-*- 3 blades: 1_01 1_03 1_04 -*-
2.4GHz
-*- 1 blade: 1_02 -*-
1.69GHz

[Expert@SG-s01-01:0]#