asg_traffic_stats

This command is supported only on:

  • Scalable Chassis

Note - You can run this command in Gaia gClish or in the Expert mode.

Description

Show traffic statistics for ports on Security Switch Modules (SSMs) during a specified time period:

  • Throughput (Bits per second)

  • Packet rate (packets per second)

  • Packet rate statistics are divided to four categories:

  • Unicast

  • Multicast

  • Broadcast

  • Total packets per second

Syntax

asg_traffic_stats {<SSM ID> | <Name of SSM Interface>} [<Period>]

Parameters

Parameter

Description

<SSM ID>

Specifies the SSM ID - 1,2, 3, or 4.

<Name of Interface>

Specifies the name of the SSM interface.

<Period>

Specifies the time period, during which to collect the statistics.

Default: 5 seconds.

Examples

[Expert@SG-s01-01:0]# asg_traffic_stats 1 2
Processing traffic statistics for 2 seconds...

Summary on SSM1
----------------
  Incoming traffic:
  ------------------
  Throughput: 48.0 Kbps
  Packet rate: [Total: 49 pps], [Unicast: 0 pps], [Multicast: 18 pps], [Broadcas                                                                                             t: 31 pps]

  Outgoing traffic:
  ------------------
  Throughput: 959.7 Kbps
  Packet rate: [Total: 1.3 Kpps], [Unicast: 0 pps], [Multicast: 0 pps], [Broadca                                                                                             st: 1.3 Kpps]

[Expert@SG-s01-01:0]#