asg_reboot

This command is supported only on these:

  • ElasticXL Cluster

  • Maestro Security Group

  • Scalable Chassis Security Group

Note - You can run this command in Gaia gClish or in the Expert mode.

Description

This command performs only a software reboot.

Notes:

  • At least one Security Group Member must be in the state "UP" to run this command.

  • For Scalable Chassis:

    To learn how to restart an SSM from the CMM, see asg_chassis_ctrl.

Related Commands

Syntax

asg_reboot

      -h

      -a

      -b <SGM IDs>

Parameters

Parameter

Description

-h

Shows the built-in help.

No Parameters

Runs the command on all Security Group Members.

-a

Includes Security Group Members in the Administrative "DOWN" state.

-b <SGM IDs>

Specifies the Security Group Members, for which to run this command.

By default, applies to Security Group Members.

Applies to Security Group Members as specified by the <SGM IDs>.

<SGM IDs> can be:

  • No <SGM IDs> specified, or all

    Applies to all Security Group Members and all Sites

  • One Security Group Member (for example, 1_1)

  • A comma-separated list of Security Group Members (for example, 1_1,1_4)

  • A range of Security Group Members (for example, 1_1-1_4)

  • One Site (chassis1, or chassis2)

  • The Active Site (chassis_active)

Examples

[Expert@HostName-ch0x-0x:0]# asg_reboot -b 1_03,2_05
You are about to perform hard reboot on SGMs: 1_03,2_05
It might cause performance hit for a period of time
 
Are you sure? (Y - yes, any other key - no) Y
 
Hard reboot requires auditing
Enter your full name: User1
Enter reason for hard reboot [Maintenance]:
WARNING: Hard reboot on SGMs: 1_03,2_05, User: User1, Reason: Maintenance
 
Rebooting SGMs: 1_03,2_05