Enabling and Disabling CoreXL

Important Notes for Cluster:

To change the CoreXL configuration

Step

Instructions

1

Connect to the command line on the Security GatewayClosed Dedicated Check Point server that runs Check Point software to inspect traffic and enforce Security Policies for connected network resources..

Note - On Scalable Platforms (Maestro and Chassis), you must connect to the applicable Security GroupClosed A logical group of Security Appliances (in Maestro) / Security Gateway Modules (on Scalable Chassis) that provides Active/Active cluster functionality. A Security Group can contain one or more Security Appliances / Security Gateway Modules. Security Groups work separately and independently from each other. To the production networks, a Security Group appears a single Security Gateway. In Maestro, each Security Group contains: (A) Applicable Uplink ports, to which your production networks are connected; (B) Security Appliances (the Quantum Maestro Orchestrator determines the applicable Downlink ports automatically); (C) Applicable management port, to which the Check Point Management Server is connected..

2

Log in to Gaia ClishClosed The name of the default command line shell in Check Point Gaia operating system. This is a restricted shell (role-based administration controls the number of commands available in the shell). or Expert mode.

Note - On Scalable Platforms (ElasticXL, Maestro, and Chassis), you must use Gaia gClishClosed The name of the global command line shell in Check Point Gaia operating system for Security Appliances connected to Check Point Quantum Maestro Orchestrators and for Security Gateway Modules on Scalable Chassis. Commands you run in this shell apply to all Security Gateway Module / Security Appliances in the Security Group. or the Expert mode.

3

Run:

cpconfig

4

Enter the number of the Check Point CoreXL option.

5

Enter the number of the applicable option:

(1) Change the number of firewall instances

(2) Change the number of IPv6 firewall instances

(3) Disable Check Point CoreXL

6

Follow the instructions on the screen.

7

Exit from the cpconfig menu.

8

Reboot.