fwaccel stat

Description

The fwaccel stat and fwaccel6 stat commands show this information on the Security GatewayClosed Dedicated Check Point server that runs Check Point software to inspect traffic and enforce Security Policies for connected network resources., or Cluster MemberClosed Security Gateway that is part of a cluster.:

Shows this information:

Column

Information

Id

Always 0.

Name

SecureXLClosed Check Point product on a Security Gateway that accelerates IPv4 and IPv6 traffic that passes through a Security Gateway. mode (KPPAK or UPPAK).

Status

Enabled or Disabled.

Interfaces

Names of accelerated interfaces.

Features

Names of accelerated features.

In addition, these command show the status of these features (enabled or disabled):

  • SecureXL Accept Templates.

  • SecureXL Drop Templates.

  • SecureXL NAT Templates.

  • SecureXL status of LightSpeed Acceleration.

Syntax for IPv4

fwaccel stat

Syntax for IPv6

fwaccel6 stat

Example

[Expert@MyGW:0]# fwaccel stat
+---------------------------------------------------------------------------------+
|Id|Name     |Status     |Interfaces               |Features                      |
+---------------------------------------------------------------------------------+
|0 |KPPAK    |enabled    |eth0,eth1                |Acceleration,Cryptography     |
|  |         |           |                         |                              |
|  |         |           |                         |Crypto: Tunnel,UDPEncap,MD5,  |
|  |         |           |                         |SHA1,3DES,DES,AES-128,AES-256,|
|  |         |           |                         |ESP,LinkSelection,DynamicVPN, |
|  |         |           |                         |NatTraversal,AES-XCBC,SHA256, |
|  |         |           |                         |SHA384,SHA512                 |
+---------------------------------------------------------------------------------+
 
Accept Templates : enabled
Drop Templates   : disabled
NAT Templates    : enabled
LightSpeed Accel : disabled
[Expert@MyGW:0]#