fwaccel tab

Description

The fwaccel tab and fwaccel6 tab commands show the contents of the specified SecureXL kernel table.

Notes:

Dynamic tables, such as the connections table can change while this command prints their contents.

This may cause some values to be missed or reported twice.
For some tables, the command prints their contents on the screen.
For some tables, the command prints their contents to the /var/log/messages file.
Also, see the fw tab command.

Syntax for IPv4

fwaccel tab [-f] [-m <Number of Rows>] -t <Name of Kernel Table>

fwaccel tab -s -t <Name of Kernel Table>

Syntax for IPv6

fwaccel6 tab [-f] [-m <Number of Rows>] -t <Name of Kernel Table>

fwaccel6 tab -s -t <Name of Kernel Table>

Parameters

Parameter	Description
No Parameters	Shows the applicable built-in usage.
`-f`	Formats the output. We recommend to always use this parameter.
`-m <Number of Rows>`	Specifies how many rows to show from the kernel table. Note - The command counts from the top of the table. Default : 1000
`-s`	Shows summary information only.
`-t <Name of Kernel Table>`	Specifies the kernel table. This command supports only these kernel tables: `connections` `dos_ip_blacklists` `dos_pbox` `dos_pbox_violating_ips` `dos_rate_matches` `dos_rate_track_src` `dos_rate_track_src_svc` `drop_templates` `frag_table` `gtp_apns` `gtp_tunnels` `if_by_name` `inbound_SAs` `invalid_replay_counter` `ipsec_mtu_icmp` `mcast_drop_conns` `outbound_SAs` `PMTU_table` `<Profile>` `reset_table` `vpn_link_selection` `vpn_trusted_ifs`

Examples

[Expert@MyGW:0]# fwaccel tab -f -m 200 -t connections
Table connections is empty
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t inbound_SAs
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t outbound_SAs
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t vpn_link_selection
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t drop_templates
Table drop_templates is empty
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t vpn_trusted_ifs
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t profile
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t mcast_drop_conns
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t invalid_replay_counter
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t ipsec_mtu_icmp
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t gtp_tunnels
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t gtp_apns
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t if_by_name
Table contents written to /var/log/messages.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t PMTU_table
Table PMTU_table is empty
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t frag_table
Table frag_table is empty
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t reset_table
Table reset_table is empty
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t dos_ip_blacklists
Table dos_ip_blacklists is not active for SecureXL device 0.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t dos_pbox
Table dos_pbox is not active for SecureXL device 0.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t dos_rate_matches
Table dos_rate_matches is not active for SecureXL device 0.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t dos_rate_track_src
Table dos_rate_track_src is not active for SecureXL device 0.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t dos_rate_track_src_svc
Table dos_rate_track_src_svc is not active for SecureXL device 0.
[Expert@MyGW:0]#

[Expert@MyGW:0]# fwaccel tab -t dos_pbox_violating_ips
Table dos_pbox_violating_ips is not active for SecureXL device 0.
[Expert@MyGW:0]#