General Diagnostic in Security Groups

Based on the OSI model, you can run these commands:

Layer
Number

Layer
Name

Recommended
Diagnostic Commands

7

Application

N / A

6

Presentation

  • For information about the Firewall drops, run this command in the Expert mode:

    g_fw ctl zdebug + drop

  • For information about the Software Blade Updates, run this command in the Expert mode:

    asg_swb_update_verifier

    See asg_swb_update_verifier.

  • Examine the Security Gateway logs on the Management Server or Log Server

5

Session

  • For information about the Connections table, run this command in the Expert mode:

    g_fw tab -t connections -s

  • For information about the Firewall drops, run this command in the Expert mode:

    g_fw ctl zdebug + drop

  • For information about the performance, run these commands in Gaia gClish:

    insights

    show cluster info

    See:

4

Transport

  • For information about the Correction Layer and traffic flow, use the g_tcpdump command in the Expert mode

    See tcpdump.

  • For information about the VPN, examine the Security Gateway logs on the Management Server or Log Server

3

Network

  • In the Expert mode, run these commands:

    • For information about the traffic:

      asg_ifconfig

      See asg_ifconfig.

    • For information about the routes:

      asg_route

      See asg_route.

    • For information about the dynamic routes:

      asg_dr_verifier

      See asg_dr_verifier.

    • For information about the routes:

      netstat -rn

    • For information about the routes:

      route

  • In Gaia gClish, run these commands:

    • For information about the traffic:

      asg_ifconfig

      See asg_ifconfig.

    • For information about the routes:

      asg_route

      See asg_route.

    • For information about the routes:

      show route ...

2

Data Link

1

Physical

  • Run this command in Gaia gClish:

    show maestro port <Port>

  • For information about the Bond interfaces, run this command in the Expert mode:

    cat /proc/net/bonding/<Name of Bond Interface>

  • For information about the Port Link, run this command in the Expert mode:

    ethtool ethsBP<X>-<XX>

  • For information about the interface statistics, run this command in the Expert mode:

    ethtool -S ethsBP<X>-<XX>