fw -i

Description

By default, the "fw" commands apply to the entire Security GatewayClosed Dedicated Check Point server that runs Check Point software to inspect traffic and enforce Security Policies for connected network resources..

The fw commands show aggregated information for all CoreXLClosed Performance-enhancing technology for Security Gateways on multi-core processing platforms. Multiple Check Point Firewall instances are running in parallel on multiple CPU cores. Firewall instances.

The fw -i commands apply to the specified CoreXL Firewall instance.

Syntax

fw -i <ID of CoreXL Firewall instance> <Command>

Parameters

Parameter

Description

<ID of CoreXL Firewall instance>

Specifies the ID of the CoreXL Firewall instance.

To see the available IDs, run the "fw ctl multik stat"fw ctl multik stat command.

<Command>

Only these commands support the fw -i syntax:

  • fw -i <ID> conntab ...

  • fw -i <ID> ctl get ...

  • fw -i <ID> ctl leak ...

  • fw -i <ID> ctl pstat ...

  • fw -i <ID> ctl set ...

  • fw -i <ID> monitor ...

  • fw -i <ID> tab ...

For details and additional parameters for any of these commands, refer to the corresponding entry for each command.

Example 1 - Show the Connections table for CoreXL Firewall instance #1

fw -i 1 tab -t connections

Example 2 - Show various internal statistics for CoreXL Firewall instance #1

fw -i 1 ctl pstat