fw ctl multik prioq

Description

Configures the CoreXLClosed Performance-enhancing technology for Security Gateways on multi-core processing platforms. Multiple Check Point Firewall instances are running in parallel on multiple CPU cores. Firewall Priority Queues. For more information, see sk105762.

Important - This command saves the configuration in the $FWDIR/conf/prioq_mode.conf file. You must not edit this file manually.

Syntax for IPv4

fw ctl multik prioq [{0 | 1 | 2}]

Syntax for IPv6

fw6 ctl multik prioq [{0 | 1 | 2}]

Parameters

Parameter

Description

No Parameters

Shows the interactive menu for configuration of the CoreXL Firewall Priority Queues.

0

Disables the CoreXL Firewall Priority Queues.

1

Enables the CoreXL Firewall Priority Queues.

2

Enables the CoreXL Firewall Priority Queues in the Evaluator-only mode.

Example

[Expert@MyGW:0]# fw ctl multik prioq
Current mode is Off
 
Available modes:
0.      Off
1.      Evaluator-only
2.      On
 
Choose the desired mode number: (or 3 to Quit)
[Expert@MyGW:0]#