Routing Options

This chapter describes routing options that apply to all dynamic routing protocols.

To configure Routing Options in Gaia Portal:

  1. From the left navigation tree, click Advanced Routing > Routing Options.

  2. Configure the applicable settings.

  3. In the Routing Options section (at the top), click Apply.

To discard the unsaved changes in Routing Options in Gaia Portal:

  1. From the left navigation tree, click Advanced Routing > Routing Options.

  2. Configure the applicable settings.

  3. In the Routing Options section (at the top), click Reload.

To restart the Routing Daemon in Gaia Portal:

  1. From the left navigation tree, click Advanced Routing > Routing Options.

  2. Scroll to the bottom of this page.

  3. Click Restart Routing Daemon.

    Important - Do not use this button to add or remove routing options. Use the Apply button located at the top of this page.

To see the Routing Daemon log file in Gaia Portal:

  1. From the left navigation tree, click Advanced Routing > Routing Options.

  2. In the top right corner, click the Monitoring tab.

  3. In the Trace File field, select the applicable file.

  4. In the Number of lines field, enter the applicable number of lines to show.

    Range: 5-100

    Default: 40

  5. Click Get Tail.