Multithreading

You can configure GaiaClosed Check Point security operating system that combines the strengths of both SecurePlatform and IPSO operating systems. to run the Routing Daemon in multithreaded mode.

This increases the responsiveness of monitoring operations during heavy traffic load.

Important:

Configuring "Multithreading" in Gaia Portal

To enable this option in Gaia Portal:

  1. From the left navigation tree, click Advanced Routing > Routing Options.

  2. In the Advanced Routing Options section, select Multithreading.

  3. In the Routing Options section (at the top), click Apply.

To disable this option in Gaia Portal:

  1. From the left navigation tree, click Advanced Routing > Routing Options.

  2. In the Advanced Routing Options section, clear Multithreading.

  3. In the Routing Options section (at the top), click Apply.

Configuring "Multithreading" in Gaia Clish

To enable this option in Gaia Clish:

  1. Enable this option:

    set router-options multithreading on

  2. Save the configuration:

    save config

  3. Examine the configuration:

    show router-options

    Examine the row Multithreading.

To disable this option in Gaia Clish:

  1. Disable this option:

    set router-options multithreading off

  2. Save the configuration:

    save config

  3. Examine the configuration:

    show router-options

    Examine the row Multithreading.