Route Maps - Export and Import

Important - In a ClusterClosed Two or more Security Gateways that work together in a redundant configuration - High Availability, or Load Sharing., you must configure all the Cluster Members in the same way.

  • To see the available "set" commands for Routemaps, enter in Gaia ClishClosed The name of the default command line shell in Check Point Gaia operating system. This is a restricted shell (role-based administration controls the number of commands available in the shell).:

    set routemap[Esc][Esc]

  • To see the configured Routemaps, enter in GaiaClosed Check Point security operating system that combines the strengths of both SecurePlatform and IPSO operating systems. Clish:

    show routemaps

    show routemap <Name of Route Map> {all | id <1-65535>}

  • To see the available commands for IPv4 RIP Routemaps, enter in Gaia Clish:

    set rip export-routemap[Esc][Esc]

    set rip import-routemap[Esc][Esc]

  • To see the available commands for IPv6 RIPng Routemaps, enter in Gaia Clish:

    set ipv6 ripng export-routemap[Esc][Esc]

    set ipv6 ripng import-routemap[Esc][Esc]

  • To see the available commands for IPv4 OSPFv2 Routemaps, enter in Gaia Clish:

    set ospf export-routemap[Esc][Esc]

    set ospf import-routemap[Esc][Esc]

  • To see the available commands for IPv6 OSPFv3 Routemaps, enter in Gaia Clish:

    set ipv6 ospf3 export-routemap[Esc][Esc]

    set ipv6 ospf3 import-routemap[Esc][Esc]

  • To see the available commands for IPv4 BGP Routemaps, enter in Gaia Clish:

    set bgp external remote-as <BGP Peer AS Number> export-routemap[Esc][Esc]

    set bgp external remote-as <BGP Peer AS Number> import-routemap[Esc][Esc]

    set bgp external remote-as <BGP Peer AS Number> peer <Peer IP Address> export-routemap[Esc][Esc]

    set bgp external remote-as <BGP Peer AS Number> peer <Peer IP Address> import-routemap[Esc][Esc]

    set bgp internal export-routemap[Esc][Esc]

    set bgp internal import-routemap[Esc][Esc]

    set bgp internal peer <Peer IP Address> import-routemap[Esc][Esc]

set {ospf | ipv6 ospfv3 | rip | ipv6 ripng}

      export-routemap <Name of Route Map> preference <1-65535> on

      import-routemap <Name of Route Map> preference <1-65535> on

set {ospf | ospfv3 | rip | ipv6 ripng}

      export-routemap <Name of Route Map> off

      import-routemap <Name of Route Map> off

show {ospf | ospfv3 | rip | ipv6 ripng | bgp) routemap

set bgp external remote-as <1-65535>

      export-routemap <Name of Route Map>

            off

            preference <1-65535> [family {inet | inet6 | inet-and-inet6}] on

set bgp external remote-as <1-65535>

      import-routemap <Name of Route Map>

            off

            preference <1-65535> [family {inet | inet6 | inet-and-inet6}] on

set bgp internal

      export-routemap <Name of Route Map>

            off

            preference <1-65535> [family {inet | inet6 | inet-and-inet6}] on

set bgp internal

      import-routemap <Name of Route Map>

            off

            preference <1-65535> [family {inet | inet6 | inet-and-inet6}] on

Note - You cannot use route maps in BGP confederations.

To configure route filters and redistribution for BGP confederations, use these pages in Gaia PortalClosed Web interface for the Check Point Gaia operating system.:

Advanced Routing > Inbound Route Filters

Advanced Routing > Route Redistribution

Parameter

Description

<Name of Route Map>

The name of the configured route map.

preference <1-65535>

Determines the order, in which this Route Map is applied in export policy.

Route Maps are evaluated in order of increasing preference value.

family {inet | inet6 | inet-and-inet6}

Restricts this Route Map to match only routes with the specified address family or families.

  • inet - Ensures this Route Map is applied only to IPv4 routes.

  • inet6 - Ensures this Route Map is applied only to IPv6 routes.

  • inet-and-inet6 - Configure this option, if the Route Map must be applied to all routes.

Default: inet