LSMcli AddROBO <Appliance_Model>

Description

This command adds a Small Office Appliance Gateway.

Syntax

LSMcli [-d] <Mgmt Server> <Username> <Password> AddROBO <Appliance_Model> <ROBOName> <Profile> [-O=<ActivationKey> [-I=<IP>]] [[-CA=<CaName> [-R=<CertificateIdentifier#>] [-KEY=<AuthorizationKey>]]

Parameters

Parameter

Description

<Mgmt Server>

Name or IP address of the Security Management Server or Domain Management Server.

<Username>

User name of standard Check Point authentication method.

<Password>

Password of standard Check Point authentication method.

<Appliance_Model>

Model of appliance:

  • For 1100 appliances, enter: CPSG80

  • For 1200R appliances, enter: 1200R

  • For 1430 or 1450 appliances, enter: 1430/1450

  • For 1470 or 1490 appliances, enter: 1470/1490

  • For 1530 or 1550 appliances, enter: 1530/1550

  • For 1570 or 1590 appliances, enter: 1570/1590

<RoboName>

Name of a SmartLSM Security Gateway.

<Profile>

Name of a SmartLSM Security Profile that was defined in SmartConsole.

<ActivationKey>

SIC one-time password (for this action, a certificate is generated).

IP

IP address of the gateway (for this action, a certificate is pushed to the gateway).

<CaName>

Name of the Trusted CA object (created from SmartConsole).

The IKE certificate request is sent to this CA. Default is Check Point Internal CA.

<CertificateIdentifier#>

Key identifier for third-party CA.

<AuthorizationKey>

Authorization Key for third-party CA.

Examples

  • To add a 1100 appliance Security Gateway:

    LSMcli 192.168.3.26 aa aaaa AddROBO CPSG80 Paris_GW small_office_profile

  • To add a 1470/1490 appliance Security Gateway:

    LSMcli 192.168.3.26 aa aaaa AddROBO 1470/1490 Paris_GW small_office_profile